3w UV Laser Marking Machine For Glass Plastic Non Metal Material
Mini uv laser marking machine 3w main features
- Laser (light source): 355nm ultraviolet laser
- Air-cooled device, small size, 20,000 hours maintenance-free (theoretical service life is 20,000 hours).
- It requires water cooling, distilled water or pure water.
- The focused spot is extremely small, the processing heat affected zone is small (cold light), and the heated area of the material is smaller. Not easy to be deformed by heat, ultra-fine marking, marking of special materials.
- The use cost is low, the beam quality is better, the efficiency is high, the power consumption is low, and it is more energy-saving and environmentally friendly.
- It can be applied to the high-end market, ultra-fine marking environment, cosmetics, medicine, LCD liquid crystal, electronic components, communication equipment, food and drug packaging, glass division, electronic components, metal jewelry marking.
Mini uv laser marking machine 3w Size
Mini uv laser marking machine 3w specification
| UV Laser Marking Machine |
| | Parameter | Unit | Description |
| Wavelength | 354.7 | nm | |
| Average Output Power | 2.0~~10.0 | W | @30kHz |
| Pulse Width | <16 | ns | @30kHz |
| Pulse Repetition Rate | 10-100 | kHz | |
| Spatial Mode | TEMoo | | |
| M2 | <1.2 | | |
| Beam Diameter | 2.0+/-0.2 | mm | 1m Measured at window |
| Beam Full Divergence Angle | <0.5 | mrad | |
| Beam Circularity | >0.9 | | |
| Pulse-to-Pulse Stability | <3 | % | RMS |
| Average Power Stability | <5 | % | RMS/8hr |
| Beam-Pointing Drift | <25 | µrad/℃ | |
| Polarization Ratio | >100:1 | | |
| Polarization Orientation | Horizontal | | |
| Operating Temp. & RH | 10 to 35
<80 | ℃
% | |
| Storage Temp. & RH | -20 to 65
<90 | ℃
% | |
| Electricity Requirement Power Consumption | 100-240
50/60
<800 | VAC
Hz
W | Single phase |
| Warranty | 12 | months |
|
Mini uv laser marking machine Samples
Mini uv laser marking machine packing
FAQ
Q1: What is packaging and will it protect the product?
A: We have 3 layers of packaging. The exterior uses a fumigation-free wooden box. In the middle of the machine, the machine is covered with foam to prevent the machine from shaking. For the inner layer, the machine is covered with a waterproof plastic film.
Q2: What is the delivery time?
A: Normally, the delivery time is within 5 working days after receiving the payment.
Q3: What payment terms can you accept?
Answer: We can make any payment, such as TT, LC, Western Union, Paypal, e-check, MasterCard, cash, etc.
Q4: How is the transportation method?
A: According to your actual address, we can ship by sea, air, truck or rail. We can also send the machine to your office according to your requirements.
Product Tags:
|
|
3w UV Laser Marking Machine For Glass Plastic Non Metal Material Images
|
